See all

Huawei unveils 20 kW all-in-one residential energy storage system

Huawei has launched the Luterra S2, an all-in-one residential energy storage system combining hybrid inverters, LFP batteries and AI-based energy management. It offers inverter capacities from 3 kW to 20 kW, scalable storage up to 336 kWh and a claimed maximum efficiency of 99%.
Huawei Luterra S2 storage systems | Image: Huawei

Huawei has launched the Luterra S2, an all-in-one residential energy storage system combining a hybrid inverter, lithium iron phosphate (LFP) batteries and AI-based energy management.

The system is available with single-phase hybrid inverters rated from 3 kW to 10 kW and three-phase units from 5 kW to 20 kW. Up to three 20 kW inverters can be connected in parallel, providing a maximum combined output of 60 kW.

The LFP battery modules have nominal capacities of 5.02 kWh and 7.03 kWh, with usable capacities of 4.9 kWh and 6.9 kWh, respectively. The smaller module supports rated charging and discharging powers of 2.5 kW and 3 kW, compared with 3.5 kW and 4 kW for the larger version. Peak discharge power over 10 seconds reaches 5 kW and 7 kW, respectively.

Both modules measure 590 mm × 255 mm × 290 mm and weigh 46 kg and 57 kg.

The modular configuration supports up to 48 battery packs across interconnected systems, providing a maximum nominal storage capacity of 336 kWh when using the 7.03 kWh modules. Huawei said the batteries feature integrated energy optimizers and are designed for a service life exceeding 15 years. The company claims lifetime usable energy throughput of up to 5 MWh per kWh of battery capacity.

The inverters use silicon carbide (SiC) power electronics and active neutral-point-clamped (ANPC) topology. According to Huawei’s preliminary specifications, single-phase models achieve a maximum efficiency of 98.6%, compared with 99% for three-phase units. Maximum PV input voltage is 600 V and 1,100 V, respectively, with up to three maximum power point trackers (MPPTs) and an input current of up to 18 A per tracker. Three-phase models support up to 40 kWp of PV input power.

For backup applications, the system offers a switchover time of less than 10 milliseconds and supports continuous off-grid loads of up to 20 kW. The 20 kW three-phase inverter can deliver peak backup output of up to 40 kW for 10 seconds, according to the preliminary specifications.

The Luterra S2 uses passive cooling without external fans, with claimed operating noise levels below 29 dB. It operates at ambient temperatures from –25 C to 60 C and features an IP66-rated enclosure and corrosion protection up to C5-M.

Huawei’s AI Energy Management 2.0 platform uses weather forecasts, electricity tariffs, household consumption data and battery status to optimize energy flows between PV installations, storage, electric vehicle chargers and heat pumps. It also supports participation in virtual power plants.

Connectivity options include EEBUS, SG Ready, OCPP and Modbus TCP. Additional software features include an AI-based assistant for homeowners, 3D modeling tools for installers and remote diagnostics.

The battery system incorporates cell-level thermal isolation, pressure relief and smoke evacuation channels, along with continuous temperature monitoring of AC and DC terminals.

Huawei said the system has undergone TÜV Rheinland safety testing, including thermal runaway, fire exposure and hydrogen explosion tests. The company also reported UL 9540A validation and compliance with IEC 63027 requirements for arc-fault protection.

The company has not disclosed pricing or market availability details.

From ESS News

This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: [email protected].

Comments