The performance and quality of Jinergy’s Passivated Emitter and Rear Cell (PERC) solar modules remain at a hight level by adopting advanced ALD technology, applying intelligence manufacturing and online SPC(Statistcal Process Control). At present, Jinergy’s output of 72-cell 365W PERC solar modules accounts for over 80%, with first-year LID lower than 1.5%. And output rate of high power modules will continue to grow in the future. The first utility scale solar plant in Whyalla, South Australia, is one of the many projects using Jinergy PERC solar modules. The project is estimated to generate 10 GWh electricity each year.
With the average conversion rate up to 21.8% and a rise of 7% in power output per square meter, Jinergy’s PERC solar modules decrease the system cost per watt, and bring about stable expectable ROI (Return on Investment) to investors. According to Dr. Yang, as energy restructuring and FiT reduction are speeding up, HJT is the ideal solution to effectively reduce levelized cost of electricity (LCOE), the widely used standard to evaluate investment of PV power stations.
Jinergy is the first PV manufacturer to realize mass production of HJT solar modules in mainland China. Currently, average HJT cell mass production efficiency has exceeded 23.27%, and will expect to reach 24% by the end of 2018. Due to bifacial design, power generation of Jinergy’s HJT modules can be increased by 10% to 30% in different applications, such as grassland, concrete floor, snowfield and reflective cloth. Overall generating capacity of Jinergy HJT modules is 44% higher than that of regular ones. Jinergy is also the first photovoltaic enterprise to receive the certification under new IEC (International Electrotechnical Commission) standard, which has raised requirements on design and production of PV module. Production capacity of Jinergy’s HJT cell and module manufacture base will expand to GW scale and cost will drop to make breakthroughs in LCOE.
By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.
Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.
You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.
Further information on data privacy can be found in our Data Protection Policy.