From pv magazine global
A scientist from South Valley University in Egypt is proposing a new converter topology to harmonize and maximize electricity generation in wind-solar power projects.
Shazly A. Mohamed’s system of modeling and analyzing grid-connected hybrid PV-wind projects, driven by synchronous generators and based on multi-input rectifier converters is proposed in the paper Multi-input rectifier stage for a system of hybrid PV/wind driven PMSG.
The process is said to help hybrid project developers eliminate the need for extra input filters and to eradicate electrical current harmonics.
Mohamed said permanent magnetic synchronous generators (PMSG) are usually applied to wind power generators, due to their reliability and efficiency, and enable such installations to produce maximum power for all working conditions and wind speeds. The researcher, from South Valley’s Department of Electrical Engineering, says his hybrid PMSG configuration – a MATLAB-based Simulink system based on a multi-input rectifier stage – is a viable option to maximize generation in wind-solar projects.
The paper adds, the step-up converter topology with control of maximum power point tracking technique they are proposing, should be able to lower PMSG terminal voltage in low wind speeds or increase it when the wind blows strongly. According to Mohamed’s findings, the fusion of multi-input rectifier topology works completely for separate and simultaneous operation.
The simulation, performed using MATLAB-based Simulink software, showed the proposed control strategies achieved the desired system performance, said Mohamed, who added: “The numerical simulation results have proven the robustness of the proposed hybrid PV and wind energy in response to rapid changes in solar radiation and wind speed conditions.”
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.
It looks to me like he’s taking care of the power at the wind generation end instead of at the inverter output end. Using a DC to DC converter makes sense for a stable D.C. buss. Instead of relying so much on algorithmized inputs take the ability of very large scale energy storage batteries to sort out current and voltage discrepancies, then use 18 pulse inverter technology to smooth the A.C. output into the grid and decrease the harmonic distortion on the grid.