How long do residential solar batteries last?

Share

From pv magazine USA

In Parts 1 and 2 of this series, pv magazine reviewed the productive lifespan of residential solar panels and inverters. Here, we examine home batteries, how well they perform over time, and how long they last.

Residential energy storage has become an increasingly popular feature of home solar. Data collected by analyst SunWiz found that a record 57,000 residential battery energy storage systems, with a combined capacity of 656 MWh, were installed in Australian homes in 2023, up 21% on the previous year. About 250,000 Australian homes, totalling 2,770 MWh, now have a battery system. And it’s a trend that SunWiz expects to accelerate in 2024. This year, the distributed market segment analysts expect approximately 70,000 residential batteries to be installed.

Besides providing backup power during outages, many batteries are integrated with technology that allows for intelligent scheduling of the import and export of energy. The goal is to maximise the value of the home’s solar system. And, some batteries are optimised to integrate an electric vehicle charger.

Life of a battery

Warranty periods can offer a look into installer and manufacturer expectations of the life of a battery. Common warranty periods are typically around 10 years. The warranty for the Enphase IQ Battery, for instance, ends at 10 years or 7,300 cycles, whatever occurs first.

Solar installer Sunrun said batteries can last anywhere between 5-15 years. That means a replacement likely will be needed during the 20-30 year life of a solar system.

Battery life expectancy is mostly driven by usage cycles. As demonstrated by the LG and Tesla product warranties, thresholds of 60% or 70% capacity are warranted through a certain number of charge cycles.

Two use scenarios drive this degradation: overcharge and trickle charge, said the Faraday Institute. Overcharge is the act of pushing current into a battery that is fully charged. Doing this can cause it to overheat, or even potentially catch fire.

Trickle charge involves a process in which the battery is continually charged up to 100%, and inevitably losses take place. The bounce between 100% and just under 100% can elevate internal temperatures, diminishing capacity and lifetime.

Another cause of degradation over time is the loss of mobile lithium-ions in the battery, said Faraday. Side reactions in the battery can trap free usable lithium, thereby lowering capacity gradually.

While cold temperatures can halt a lithium-ion battery from performing, they do not actually degrade the battery or shorten its effective life. Overall battery lifetime is, however, diminished at high temperatures, said Faraday. This is because the electrolyte that sits between the electrodes breaks down at elevated temperatures, causing the battery to lose its capacity for Li-ion shuttling. This can reduce the number of Li-ions the electrode can accept into its structure, depleting the lithium-ion battery capacity.

Maintenance

It is recommended by the National Renewable Energy Laboratory (NREL) to install a battery in a cool, dry place, preferably a garage, where the impact of a fire (a small, but non-zero threat) may be minimised. Batteries and components around them should have proper spacing to allow cooling, and regular maintenance check-ups can be helpful in ensuring optimal operation.

NREL said that whenever possible, avoid repeated deep discharging of batteries, as the more it is discharged, the shorter the lifetime. If the home battery is discharged deeply every day, it may be time to increase the battery bank’s size.

Batteries in series should be kept at the same charge, said NREL. Though the entire battery bank may display an overall charge of 24 volts, there can be varied voltage among the batteries, which is less beneficial to protecting the entire system over the long run. Additionally, NREL recommended that the correct voltage set points are set for chargers and charge controllers, as determined by the manufacturer.

Inspections should occur frequently, too, said NREL. Some things to look for include leakage (buildup on the outside of the battery), appropriate fluid levels, and equal voltage. NREL said each battery manufacturer may have additional recommendations, so checking maintenance and data sheets on a battery is a best practice.

This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.

Popular content

Potentia nurtures asset portfolio with 1 GW of new acquisitions
06 February 2025 Sydney-headquartered clean energy developer Potentia Energy has acquired over 1 GW of Australian renewable assets in agreements with CVC Dif and Cbus...