Skip to content

News

Fronius introduces 15.8 kWh lithium iron phosphate battery for rooftop PV

The Austrian manufacturer has launched its first battery system using lithium iron phosphate (LFP) cells. A total of up to four units can be connected in parallel for a capacity of 63 kWh.

Off-grid lessons help drive new Vaulta battery tech

Battery manufacturer Vaulta is using lessons learned from Australia’s growing off-grid energy sector to spearhead the development of its next-generation battery energy storage technology.

2

Wartsila to supply battery system for 1.4 GWh EnergyAustralia project

Finland’s Wartsila Energy has been engaged by EnergyAustralia to supply and commission the battery system for the 350 MW / 1,400 MWh Wooreen energy storage project being developed in Victoria’s Latrobe Valley.

1

Mitigating risks in new PV technologies

The solar energy industry continues to push the boundaries of efficiency and reliability. However, as innovative photovoltaic cell and module technologies emerge, they also bring a new set of challenges in durability and performance. A new report from IEA PVPS Task 13, titled “Degradation and Failure Modes in New Photovoltaic Cell and Module Technologies,” offers a comprehensive analysis of degradation and failure mechanisms in current photovoltaic technologies.

EPBC clears path for 320 MW solar and battery project

The way is clear for developer TotalEnergies is commence construction of a 320 MW solar and battery energy storage project in the New England region of New South Wales after the federal environment regulator ruled the project didn’t require its approval.

Jolywood releases 595 W bifacial TOPCon solar panel for harsh environments

The Chinese manufacturer said that its new glass-backsheet Windproof module utilises a zinc-aluminum-magnesium surface alloy technology and a high-strength steel substrate. It features a power conversion efficiency of up to 23.03%.

PV manufacturers making move to coated backsheets

Hard-pressed Asian solar manufacturers have switched from multi-layer polymer backsheets to a single layer of polyethylene terephthalate (PET), with a protective coating on both sides of their modules. Backsheet makers confirm these products, known as “CPC,” are now mainstream. There is little evidence to demonstrate that they can withstand 30 years-plus of outdoor use, however.

Shared apartment rooftop solar funding grants residents clean energy access

The Australian and New South Wales governments are collaborating to deliver a $25 million solar for apartments incentive for owners’ corporations and strata managers to install shared rooftop solar systems.

Government revels in record renewable investment and declining emissions

New data released by the federal government and Clean Energy Regulator indicate a record delivery of renewable energy investment and declining emissions in Australia.

1

‘A house battery you can drive around’: how a handful of Australians are selling power from their cars back to the grid

Our cars sit unused most of the time. If you have an electric vehicle, you might leave it charging at home or work after driving it. But there’s another step you could take. If you have a bidirectional charger, you can set it to sell power back to the grid when demand is high.

This website uses cookies to anonymously count visitor numbers. To find out more, please see our Data Protection Policy.

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close