Skip to content

Modules & Upstream Manufacturing

USA module manufacturer SEG Solar turns sod on 5 GW Indonesian plant

United States-headquartered solar module manufacturer SEG Solar has started building 10 N-type cell production lines in Indonesia’s Kawasan Industri Terpadu Batang industrial park, 390 kilometres east of Jakarta.

EKO unveils new solar monitoring solution

The latest irradiance sensor solution from Japan-based EKO Instruments provides continuous measurements in the field. Well-suited for bifacial PV systems, it supports the measurement of global horizontal irradiance, diffuse horizontal irradiance and direct normal irradiance, even in reflective and cloudy conditions.

Global average solar LCOE stood at $0.064/kWh in 2023, says IRENA

The weighted average levelised cost of electricity of utility-scale solar PV in Australia was 22% lower than the global average according to a new report published by the International Renewable Energy Agency.

The shifting sands of PV module supply

Chinese solar manufacturing capacity faces a downturn that is unlikely to translate into growth in other regions, writes S&P’s Edurne Zoco.

1

Trina Solar presents ‘fully recyclable’ 645 W PV module

Trina Solar claims it has developed the world’s first “fully recyclable” 645 W PV module with 20.7% efficiency. It made the panel with interlayer separation reagents, chemical etching technology, and wet chemical silver extraction tech.

Sharp unveils 610 W TOPCon solar panel with 22.58% efficiency

Sharp’s new IEC61215- and IEC61730-certified solar panels have an operating temperature coefficient of -0.29% per C and a bifaciality factor of over 80%.

Longi, ANU develop gettering-based process to improve n-type wafer quality

The Chinese module maker and the Australian National University utilised phosphorus diffusion gettering and another defect mitigation strategy to improve the quality of n-type wafers. The proposed process contributed to improve the material quality especially towards the tail-ends.

$50 million funding to boost clean energy supply chain

The Australian government will in November open applications for a $50 million funding program that is to support the development of more diverse solar PV, hydrogen electrolyser and battery supply chains in the Indo-Pacific region.

1

Paxos unveils glass-glass PV tile with heat pump integration

Paxos Solar has developed a new glass-glass PV tile that integrates with heat pumps, featuring Longi’s back-contact solar cells. The 44 W, 59.5 cm x 48 cm tile can also produce heat for residential systems.

Sharp unveils 450 W bifacial TOPCon module with 22.52% efficiency

Sharp’s new IEC61215- and IEC61730-certified solar panels have an operating temperature coefficient of -0.29% per C and a bifaciality factor of more than 80%.

This website uses cookies to anonymously count visitor numbers. To find out more, please see our Data Protection Policy.

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close